- HOW IT WORKS
HOW IT WORKS
3 replacement suction probes
Big size circular probe: for strong suction, remove blackheads or whiteheads, grease, cosmetic residue, etc, and mainly used in your T-zone area or other face areas except around the eyes.
Small hole probe: The suction is less suction compared to the big hole head, more suitable for sensitive, thin skin, blackhead less skin.
Oval probe: To lessen your wrinkle and smooth you're fine lines on the corner of your eyes and improve skin vitality.
Timing function:
3 types of time, which can protect your skin from damage.
5min Timing: for sensitive skin
10min Timing: when the blackheads not obvious
20min Timing: stubborn blackheads
How to use ANLAN Vacuum Blackhead Remover?
1. Clean your face, use the blackhead educe liquid or facial steamer to open the pore.
2. Insert the isolation pads into the slot at the top of the cleaner, select the proper probe, and install them on the nozzle.
3. Short press the control button to open. The default is the Soft level.
4. Short press the control button in turns to choose the level. Test the suction with your forearm before use.
5. Hold the probe close to your face to remove blackheads, slowly move. Do not stay in one place for too long to avoid injury, and do not press it hardly or pull vertically.
6. After clean, short press to shut down the system.
7. Remove the probe, wipe the dirt off with a cotton swab, and wash it clean, then dry with a towel or naturally. Please avoid washing or immerse the body in water.
8. After clean, use skin care products like a facial mask, cream, etc. Notes:
1. Due to long-distance transportation, the battery may be out of power. If it does not work after starting, it is recommended to use the product after a full charge.
2. To ensure a better cleaning, please use the blackhead remover or facial steamer before using the product to open the pores. The closed pores will reduce the cleaning effect.
3. For the first time using, it is recommended to test the suction with your forearm before applying it to your face.
4. To avoid injury, do not let the probe stay in one place for too long, and barely press or pull vertically. Improper use can cause facial flushing, which will go away within a few days.
5. Please do not apply on the skin wounds or scars.
6. Please keep the body away from water or other liquid.
7. Please do not use chemical cleaner so as to avoid corrosion.
8. It is recommended that cleansing should be once a week for dry skin, twice for oily skin, and each time should be within 5 minutes. If it is too often, it can lead to skin allergies.
9. Please clean the probes every time after use to avoid the filter blocked. If you plan to use alcohol, the concentration should be less than 70%.
10. Please do not use the product on children in case of damage to the skin.
Specification:
Material: ABS & PC
Battery Capacity: 300mAh
Rated Power: 2.5W
Input Voltage: 5V/1A
Package Dimension: 190*136*58mm
Weight: 129g